Grifo de ducha monomando Roca Cala en acabado negro mate — oferta Black Friday en Merkimarket
MERKIMARKET
BLACK FRIDAY 2026
Friday 27 November · Real deals on bathroom taps · 15 days left

The shower tap is installed, as a guide, with the control or diverter about 100-110 cm above the shower tray floor, the fixed head at 200-220 cm and the hand-shower outlet between 75 and 120 cm. These are reference heights: what always matters most is the comfort of whoever uses the bathroom and the dimensions of the tray or bathtub.

Fitting each tap at the right height is one of those details you don't notice until it's wrong: a shower with the control too low, a basin that splashes because the spout is too far away, or a bathtub with the tap at an awkward height. In this guide we go area by area through the right height to install basin, shower and bathtub taps, with reference measurements in centimetres, how to mark them before you start and the mistakes that come up most often.

Key facts on tap heights

  • Basin tap (deck-mounted): the basin rim sits 85-95 cm above the floor; the tap is mounted on the fixture.
  • Wall-mounted basin tap (concealed): spout 10-20 cm above the basin rim, i.e. around 100-115 cm above the floor.
  • Shower single-lever or thermostatic mixer: 100-110 cm from the shower tray floor.
  • Fixed head / column outlet: 200-220 cm, above the head of the tallest user.
  • Bathtub tap: 10-20 cm above the bath rim, usually between 65 and 80 cm from the floor.
  • Concealed water inlet: left at the height of the matching control, with the wall axis plumb.

These are recommended values for a standard bathroom in Spain; adjust them to the users' height, to whether there is a bathtub or tray, and to the type of tap chosen. We develop each point below.

Black Friday deals on bathroom taps

If you're renewing the taps as part of the refurbishment, here are some genuinely reduced bathroom tap references available right now at Merkimarket, verified on the product page:

Product Black Friday price RRP Discount
Cala shower tap with diverter, matte black (Roca) 166,36 € 290,40 € −43%
Even telescopic shower column, chrome (Roca) 333,40 € 591,69 € −44%
Monodin concealed bath-shower tap, chrome (Roca) 84,53 € 142,78 € −41%
Alfa single-lever bath-shower tap, chrome (Roca) 72,25 € 120,64 € −40%

The Cala single-lever in matte black is the most striking option for a modern shower, while the concealed Monodin solves the bath-shower set at a very keen price. You can see the rest of the reduced models in the collection: See all deals.

Prices and availability as of the publication date; they may vary.

Why tap height matters (and isn't a whim)

Tap height affects three things: comfort in use, the amount of splashing and the final look of the set. A spout that is too high over a shallow basin splashes water out; a badly placed shower control forces you to bend down to turn on the water; and a bath inlet at the wrong height leaves the tap stuck against the rim or too far from it. On top of that, in concealed installations the height is decided before tiling, so a mistake means chipping into the wall to fix it. That's why it pays to measure twice and chip once.

Single-lever high-spout basin tap in chrome finish, Delos series by IMEX

What height to install the basin tap

At the basin there are two scenarios to tell apart. If the tap is mounted on the countertop or on the basin itself (the most common case), the height is set by the fixture: you just place the basin-and-cabinet unit so the rim sits at around 85-95 cm above the floor, the comfortable height to wash your hands standing. The tap, sitting on the fixture, ends up at the height the manufacturer has already planned.

If you choose a wall-mounted concealed tap, the calculation changes: the spout must sit between 10 and 20 cm above the basin rim, which usually translates into an outlet 100-115 cm above the floor. The deeper the basin, the more margin you have; on tall countertop bowl basins, it's best to choose a high-spout or wall tap so the stream falls inside. You'll find both types in the basin taps collection, such as the Delos high-spout tap by IMEX.

What height to put the shower tap

This is the area with the most elements and the one that raises the most doubts. For a standard shower, the reference heights, measured from the shower tray floor, are these:

  • Single-lever or thermostatic mixer: 100-110 cm. It's the comfortable height to turn on and adjust the water standing, without bending down or stretching your arm.
  • Concealed water inlet for the tap: matches the control, in that same 100-110 cm band.
  • Hand-shower holder or sliding rail: between 75 and 120 cm, so it can be used sitting or standing.
  • Fixed head or column outlet: 200-220 cm, always above the head of the tallest user in the house.

On a shower column, most of these dimensions are already resolved by the unit itself: the only thing you need to position well is the wall water inlet, usually around 110 cm. If you're torn between a single-lever and a thermostatic tap for the shower, our guide on which to choose for the shower will help.

Single-lever shower tap with diverter in chrome finish, Cala series by Roca

What height the bathtub tap goes

On the bathtub the logic is the same as the wall-mounted basin: the tap sits between 10 and 20 cm above the bath rim. As the rim of a standard bath sits around 55-60 cm above the floor, the tap usually ends up installed at a height of 65-80 cm. If it's a deck tap (on the bath rim), the position is set by the bath itself; if it's wall-mounted, you must leave the water inlets plumb and at the correct spacing between hot and cold (usually 15 cm between axes). For concealed bath-shower sets, such as Roca's Monodin, the control is placed at a height easy to reach both from inside and from outside the bath.

Summary table of recommended heights

Tap / element Guide height (from the floor) Practical reference
Deck-mounted basin Rim at 85-95 cm The tap sits on the fixture
Wall-mounted basin (concealed) 100-115 cm Spout 10-20 cm above the rim
Shower control 100-110 cm Comfortable to open standing
Hand-shower / rail 75-120 cm Use standing or sitting
Fixed head 200-220 cm Above the head
Bathtub tap 65-80 cm 10-20 cm above the rim

How to mark and measure before installing, step by step

  1. Decide the tap type and the area. A deck tap is not the same as a concealed one: the concealed type requires leaving the inlets inside the wall before tiling.
  2. Set the reference level. In the shower, the finished tray floor; in the bathtub, the rim; at the basin, the height of the fixture rim.
  3. Transfer the measurements to the wall with a pencil and a level. Mark the axis of the control and, where applicable, that of the head and the hand-shower.
  4. Check the spacing between inlets (hot and cold), usually 15 cm between axes, and that they are plumb.
  5. Verify reach and accessibility by miming the gesture of turning on the tap before fixing anything. Correcting now costs a pencil; later, it costs building work.

If you're taking the chance to change the tap, our guide on types of bathroom taps explains how to choose the finish and type of installation without going wrong.

Common mistakes when fitting taps

The failures repeat: leaving the shower control too low (forcing you to bend down), placing the fixed head at a height the tallest user doesn't fit under, fitting a short basin spout over a deep basin (the water doesn't reach the centre), or badly spacing the concealed inlets so the tap won't screw on. Another classic is deciding heights without considering children or people with reduced mobility: if that's your case, lower the controls to the bottom of the recommended bands and consider a sliding shower rail.

Frequently asked questions

What height do you put the shower tap?
The shower control or diverter is installed, as a guide, about 100-110 cm above the shower tray floor, the fixed head at 200-220 cm and the hand-shower outlet between 75 and 120 cm. Adjust the dimensions to the users' height.

What height does the basin tap go?
If the tap sits on the countertop or basin, what matters is that the fixture rim is 85-95 cm above the floor. If it's a wall-mounted concealed tap, the spout sits 10-20 cm above the basin rim, around 100-115 cm above the floor.

What height is the bathtub tap installed at?
Between 10 and 20 cm above the bath rim. As the rim usually sits 55-60 cm above the floor, the tap usually ends up installed at a height of 65-80 cm.

Are the heights mandatory?
No. They are guide recommendations for comfortable use: you can adapt them to the family's height, to the presence of children or to accessibility needs. The important thing is to decide them before tiling in concealed installations.


Article written by the Merkimarket editorial team. The heights given are guide values in common use for bathroom installations in Spain; adjust them to your refurbishment, to the type of tap and to the users' needs. Prices and availability may vary; check each product page for current information.

Blog posts

View all
Aire acondicionado split Cecotec AirClima 12000 Inverter en blanco — oferta Black Friday

How to calculate the frigorías you need per m²

Aire acondicionadoAntonio Garcia
Grifo de lavabo de caño alto IMEX serie Olimpo en oro cepillado — Black Friday en Merkimarket

IMEX vs Roca: big-name brand versus value for money

BañoAntonio Garcia
Termo eléctrico con aerotermia Cecotec AeroThermal 100L Clase A+, oferta Black Friday en Merkimarket

Electric water heaters: litres, consumption and location

Agua calienteAntonio Garcia